The Water Filter is ideal for separating dirt and turbidity from your water.
PE water filter mounted on joints suitable for all water systems. The filter is suitable for separating dirt from your feed water.
Usage tips:
Shortly thyleenslang down the right and remove any burrs away, Screw the union nut so that 3/4 of the thread is visible. Remove the nut not quite Measure the length from the top of swivel to the bumper and mark it off on the thyleenslang Press Thyleenslang into the fitting up to the bumper. In order to facilitate the assembly can thyleen tip is wetted, or be coated with a lubricant. Tighten the nut by hand. Use sufficient force. The filter must always be placed on the discharge side of the pump.
Er zijn (nog) geen klantbeoordelingen van dit product. Wees de eerste!
Er is helaas nog geen zoekhulp beschikbaar voor dit product.
Capillary Hose 1,20 meter long (thinnest)
End Stop Connector for Thyleen Tube 25 mm
Water Hose flex 25 mm per meterm per meter
Capillary Tube 4.6 mm thick (Length 1 meter)
PE fast Hose 25 mm per meter
Connector for 4-6 mm Cappilary Hose
Hole Punch Tool 4 mm
Water Filter mounted with connectors and Check Valve 25 mm
Spray Lance Telescopic
Float Valve Plastic 3/4 outside threaded
| |
|
