The Water Filter is ideal for separating dirt and turbidity from your water.
PE water filter mounted on joints suitable for all water systems. The filter is suitable for separating dirt from your feed water.
Usage tips:
Shortly thyleenslang down the right and remove any burrs away, Screw the union nut so that 3/4 of the thread is visible. Remove the nut not quite Measure the length from the top of swivel to the bumper and mark it off on the thyleenslang Press Thyleenslang into the fitting up to the bumper. In order to facilitate the assembly can thyleen tip is wetted, or be coated with a lubricant. Tighten the nut by hand. Use sufficient force. The filter must always be placed on the discharge side of the pump.
Er zijn (nog) geen klantbeoordelingen van dit product. Wees de eerste!
Er is helaas nog geen zoekhulp beschikbaar voor dit product.
Cappilairs with connector for Rayjet Nozzle
Hole Punch Tool Quick Cut 2,7 mm
Brass Check Valve 16mm
Connector for Water Container 25 mm
Topspin (25mm connection)
CNL pressure valve 8 liters
Water Filter mounted with connectors and Check Valve 25 mm
Hole Punch Tool 4 mm
Spray Pen Rayet with Capillary Hose
Coupling Knee inside threaded 25 mm
| |
|
